Refereed Journal Publications

1.    Banerji, A., Hu, H., Alpas, A.T., "Ultramild Wear of A1₂O₃ Fibre and Particle Reinforced Magnesium Matrix Composite", Advanced Materials Research, Accepted for Publication.

 

2.    Sen, F.G., Qi, Y., Alpas, A.T., "Tribology of Fluorinated Diamond-Like Carbon Coatings: First Principles Calculations and Sliding Experiments", Lubrication Science, Accepted November 2011.

 

3.    Das, S., Riahi, A.R., Meng-Burany, X., Morales, A.T., Alpas, A.T., "High Temperature Deformation and Fracture of Tribo-Layers on the Surface of AA5083 Sheet Aluminum-Magnesium Alloy", Materials Science and Engineering A, 531, 2012, 76-83.

 

4.    Abougharam, A., Lukitsch, M.J., Alpas, A.T., "High Temperature Tribological Behaviour of W-DLC Against Aluminum", Thin Solid Films, 206, 2011, 1905-1912.

 

5.    Bhattacharya, S., Riahi, A.R., Alpas, A.T., "A Transmission Electron Microscopy Study of Crack Formation and Propagation in Electrochemically Cycled Graphite Electrode in Lithium-Ion Cells", Journal of Power Sources, 196, 2011, 8719-8727.

 

6.    Bhowmick, S., Alpas, A.T., "The Role of Diamond-Like Carbon Coated Drills on Minimum Quantity Lubrication Drilling of Magnesium Alloys", Surface & Coatings Technology, 205, 2011, 5302-5311.

 

7.    Shafiei, M., Alpas, A.T., "Electrochemical Performance of a Tin-Coated Carbon Fibre Electrode for Rechargeable Lithium-Ion Batteries", Journal of Power Sources, 196, 2011, 7771-7778.

 

8.    Bhattacharya S., Riahi A.R., Alpas A.T., “Characterization of Electrochemical Cycling Induced Graphite Electrode Damage in Lithium-Ion Cells”, Ceramic Transactions, 226, 2010.

 

9.    Abougharam A., Lukitsch M.J., Qi Y., Alpas A.T., “Role of Oxygen and Humidity on the Tribochemical Behaviour of Non-Hydrogenated Diamond-Like Carbon Coatings”, Wear, 271, 2010, 2157-2163.

 

10.    Dey S.K., Lukitsch M.J., Balogh M.P., Meng-Burany X., Alpas A.T., “Ultra-Mild Wear Mechanisms of Al-12.6 wt.% Si Alloys at Elevated Temperature”, Wear, 271, 2011, 1842-1853.

 

11.    Das S., Morales A.T., Riahi A.R., Meng-Burany X., Alpas A.T., “Role of Plastic Deformation on Elevated Temperature Tribological Behaviour of an Al-Mg Alloy (AA5083): A Friction Mapping”, Materials and Metallurgical Transactions A, 42, 2011, 2384-2401.

 

12.    Bhattacharya S., Riahi A.R., Alpas A.T., “In-Situ Observations of Lithiation/Delithiation Induced Graphite Damage during Electrochemical Cycling”, Scripta Materialia, 64, 2011, 165-168.

 

13.    Meng-Burany X., Perry T.A., Sachdev A.K., Alpas A.T., “Subsurface Sliding Wear Damage Characterization in Al-Si Alloys Using Focused Ion Beam and Cross-Sectional TEM Techniques”, Wear, 270, 2011, 152-162.

 

14.    Sen F.G., Qi Y., Alpas A.T., “Material Transfer Mechanisms between Aluminum and Fluorinated Carbon Interfaces”, Acta Materialia, 59, 2011, 2601–2614.

 

15.    Guo H., Qi Y., Sen F.G., Abougharam A., Alpas A.T., “The Effects of Oxygen Environment on Adhesion and Friction of Diamond and Diamond-Like Carbon Coatings”, Physical Review B, Submitted in January 2010.

 

16.    Abougharam A., Lukitsch M.J., Balogh M.P., Alpas A.T., “High Temperature Tribological Behaviour of Carbon Based (B4C and WC-DLC) Coatings against Aluminum”, Thin Solid Films, 519, 2010, 1611–1617.

 

17.    Bhowmick S., Lukitsch M.J., Alpas A.T., “Tapping of Al-6.5%Si Alloys with Diamond-Like Carbon Coated Tools and Minimum Quantity Lubrication”, Journal of Materials Processing Technology, 210, 2010, 2142-2153.

 

18.    Shafiei M., Riahi A.R., Sen F.G., Alpas A.T., “Improvement of Platinum Adhesion to Carbon Surfaces Using PVD Coatings”, Surface & Coatings Technology, 205, 2010, 306-311.

 

19.    Bhowmick S., Lukitsch M., Alpas A.T., “Dry and Minimum Quantity Lubrication Drilling of a Magnesium (AM60) Alloy”, International Journal of Machine Tools & Manufacture, 50, 2010, 444–457.

 

20.    Das S., Morales A.T., Alpas A.T., “Microstructural Evolution during High Temperature Sliding Wear of Mg-3%Al-1%Zn (AZ31) Alloy”, Wear, 268, 2010, 94-103.

 

21.    Bhattacharya S., Riahi A.R., Alpas A.T., “Indentation-Induced Subsurface Damage in Silicon Particles of Al-Si Alloys”, Materials Science and Engineering A, 572, 2009, 387-396.

 

22.    Shafiei M., Alpas A.T., “Nanocrystalline Nickel Films with Lotus Leaf Texture for Superhydrophobic and Low Friction Surfaces”, Applied Surface Science, 256, 2009, 710-719.

 

23.    Chen P., Alpas A.T., “Effect of Bismuth on the Tensile Properties and Dry Machining Performance of Al-12.7 wt% Si Alloy”, Ceramic Transactions, 207, 2009, 215-223.

 

24.    Sen F.G., Qi Y., Alpas A.T., “Surface Stability and Electronic Structure of Hydrogen and Fluorine Terminated Diamond Surfaces: A First Principles Investigation”, Journal of Materials Research, 24, 2009, 2461-2470.

 

25.    Dey S.K., Perry T.A., Alpas A.T., “Micromechanisms of Low Load Wear in an Al-18.5% Si Alloy”, Wear, 267, 2009, 515-524.

 

26.    Riahi A.R., Edrisy A., Alpas A.T., “Effect of Magnesium Content on the High Temperature Adhesion of Al-Mg Alloys to Steel Surfaces”, Surface & Coatings Technology, 203, 2009, 2030-2035.

 

27.    Chen M., Meng-Burany X., Perry T.A., Alpas A.T., “Micromechanisms and Mechanics of Ultra-Mild Wear in Al-Si Alloys”, Acta Materialia, 56, 2008, 5605-5616.

 

28.    Bhowmick S., Alpas A.T., “Minimum Quantity Lubrication Drilling of Aluminum-Silicon Alloys in Water Using Diamond-Like Carbon Coated Drills”, International Journal of Machine Tools & Manufacture, 48, 2008, 1429-1443.

 

29.    Akarca S.S., Song X., Altenhof W.J., Alpas A.T., “Deformation Behaviour of Aluminium during Machining: Modelling by Eulerian and Smoothed-Particle Hydrodynamics Methods”, Materials: Design and Applications, 222, 2008, 209-221.

 

30.    Riahi R., Morales A.T., Alpas A.T., “Evaluation of Vitreous and Devitrifying Enamels as Hot Forming Lubricants for Aluminum AA5083 Alloy”, Journal of Materials Engineering and Performance, 17, 2008, 387-394.

 

31.    Shafiei M., Alpas A.T., “Fabrication of Biotextured Nanocrystalline Nickel Films for the Reduction and Control of Friction”, Materials Science and Engineering C28, 2008, 1340-1346.

 

32.    Shafiei M., Alpas A.T., “Effect of Sliding Speed on Friction and Wear Behaviour of Nanocrystalline Nickel Tested in an Argon Atmosphere”, Wear, 265, 2008, 429-438.

 

33.    Bhowmick S., Alpas A.T., “The Performance of Hydrogenated and Non-Hydrogenated Diamond-Like Carbon Tool Coatings during the Dry Drilling of 319 Al”, International Journal of Machine Tools & Manufacture, 48, 2008, 802-814.

 

34.    Chen M., Alpas A.T., “Ultra-Mild Wear of a Hypereutectic Al-18.5 wt.% Si Alloy”, Wear, 265, 2008, 186-195.

 

35.    Riahi R., Alpas A.T., “Adhesion of AA5182 Aluminum Sheet to DLC and Nitride Coatings at RT, 300 ºC and 420 ºC”, Surface Coatings and Technology, 202, 2007, 1055-1061.

 

36.    Meng-Burany X., Alpas A.T., “FIB and TEM Studies of Damage Mechanisms in DLC Coatings Sliding against Aluminum”, Thin Solid Films, 516, 2007, 325-335.

 

37.    Yazdanian M.M., Edrisy A., Alpas A.T., “Vacuum Sliding Behaviour of Thermally Oxidized Ti-6Al-4V Alloy”, Surface Coatings and Technology, 202, 2007, 1182-1188.

 

38.    Chen M., Perry T.A., Alpas A.T., “Ultra-Mild Wear in Eutectic Al-Si Alloys”, Wear, 263, 2007, 552-561.

 

39.    Shafiei M., Alpas A.T., “Friction and Wear Mechanisms of Nanocrystalline Nickel in Ambient and Inert Atmospheres”, Metallurgical and Materials Transactions, 38A, 2007, 1621-1631.

 

40.    Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Alpas A.T., “The Role of Hydrogen in the Test Atmosphere on the Tribological Behaviour of the Nonhydrogenated DLC Coatings Against 319 Aluminium Alloy”, Tribology Transactions, 50, 2007, 178-186.

 

41.    Akarca S.S., Altenhof W.J., Alpas A.T., “Subsurface Deformation and Damage Accumulation in an Aluminum-Silicon Alloy Subjected to Sliding Contact”, Tribology International, 40, 2007, 735-747.

 

42.    Elmadagli M, Perry T.A., Alpas A.T., “A Parametric Study of the Relationship between Microstructure and Wear Resistance of Al-Si Alloys”, Wear, 262, 2007, 79-92.

 

43.    Riahi A. R. and Alpas A. T., “Fracture of Silicon Rich Particles during Sliding Contact of Al-Si Alloys”, Materials Science Engineering A, 441, 2006, 326-330.

 

44.    Konca E., Cheng Y.T. and Alpas A.T., “Sliding Wear of Non-hydrogenated Diamond-like Carbon Coatings against Magnesium”, Surface and Coatings Technology, 201, 2006, 4352-4356.

 

45.    Qi Y., Konca E. and Alpas A. T., “Atmospheric Effects on the Adhesion and Friction between Non-Hydrogenated Diamond-Like-Carbon (DLC) Coating and Aluminum – A First Principles Investigation”, Surface Science, 600, 2006, 2955-2965.

 

46.    Li J., Elmadagli M., Gertsman V.Y., Lo J. and Alpas A.T., “FIB and TEM Characterization of Subsurfaces of an Al-Si Alloy (A390) Subjected to Sliding Wear”, Materials Science and Engineering A, 421, 2006, 317-327.

 

47.    Elmadagli M. and Alpas A.T., “Sliding Wear of an Al – 18.5 wt. % Si Alloy Tested in an Argon Atmosphere and against DLC Coated Counterfaces”, Wear, 261, 2006, 823-834.

 

48.    Konca E., Cheng Y.T. and Alpas A. T., “Dry Sliding Behaviour of Non-Hydrogenated DLC Coatings against Al, Cu and Ti in Ambient Air and Argon”, Diamond and Related Materials, 15, 2006, 939-943.

 

49.    Elmadagli M. and Alpas, A. T., “Progression of Wear in the Mild Wear Regime of Al-18.5% Si Alloy”, Wear, 261, 2006, 367-381.

 

50.    Konca E., Cheng Y.T., Weiner M., Dasch J.M. and Alpas A.T., “Elevated Temperature Tribological Behaviour of Non-Hydrogenated Diamond-like-Carbon Coatings against 319 Aluminium Alloy”, Surface and Coatings Technology, 200, 2006, 3996-4005.

 

51.    Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., Erdemir A. and Alpas A.T., “Transfer of 319 Al Alloy to Titanium Diboride and Titanium Nitride Based (TiAIN, TiCN, TiN) Coatings: Effects of Sliding Speed, Temperature and Environment”, Surface and Coatings Technology, 200, 2005, 2260-2270.

 

52.    Konca E., Cheng Y.T., Weiner A.M., Dasch J.M., and Alpas A.T., “Effect of Test Atmosphere on the Tribological Behaviour of the Non-Hydrogenated Diamond-Like Carbon Coatings against 319 Aluminum Alloy and Tungsten Carbide”, Surface and Coatings Technology, 200, 2005, 1783-1791.

 

53.    Edrisy A., Perry T. and Alpas A.T., “Wear Mechanism Maps for Thermal Spray Steel Coatings”, Metallurgical and Materials Transactions A, 36, 2005, 2737-2750.

 

54.    Konca E., Cheng Y.T., Weiner A.M., Dasch J.M. and Alpas A.T., “Vacuum Tribological Behaviour of the Non-Hydrogenated Diamond-like Carbon Coatings against Aluminum: Effect of Running-in in Ambient Air”, Wear, 259, 2005, 795-799.

 

55.    Edrisy A., Perry, T. and Alpas A.T., “Investigation of Scuffing Damage in Aluminum Engines with Thermal Spray Coatings”, Wear, 259, 2005, 1056-1062.

 

56.    Xie J., Alpas A.T., and Northwood D. O., “The Role of the Heat Treatment on the Erosion-corrosion Behaviour of AlSl 52100 Steel”, Materials Science and Engineering A, 393, 2005, 42-50.

 

57.    Ni H., Elmadagli M., and Alpas A.T., “Mechanical Properties and Microstructures of 1100 Aluminum Subjected to Dry Machining”, Materials Science and Engineering A, 385, 2004, 267-278.

 

58.    Nie X., Wang L., Konca E., and Alpas A.T., “Tribological Behaviour of Oxide/Graphite Composite Coatings Deposited Using Electrolytic Plasma Process”, Surface and Coatings Technology, 188-189, 2004, 207-213.

 

59.    Raczy A., Elmadagli M., Altenhof W. J., and Alpas A. T., “An Eulerian Finite-Element Model for Determination of Deformation State of a Copper Subjected to Orthogonal Cutting”, Metallurgical and Materials Transactions A, 35A, 2004, 2393-2400.

 

60.    Altenhof W., Raczy A., Laframboise M., Loscher J. and Alpas, A.T., “Numerical Simulation of AM50A Magnesium Alloy under Large Deformation”, International Journal of Impact Engineering, 30, 2004, 117-142.

 

61.    Ni H. and Alpas A.T., “Sub-micrometer Structures Generated during Dry Machining of Copper”, Materials Science and Engineering A, 361, 2003, 338-349.

 

62.    Edrisy A. and Alpas A.T., “Wear Behaviour of PTWA and HVOF Iron Based Thermal Spray Coatings: Effects of Composition and Microstructures”, Society of Manufacturing Engineers, 2003, FC03-161.

 

63.    Xie J., Alpas A.T. and Northwood D. O., “Mechano-electrochemical Effect between Erosion and Corrosion”, Journal of Materials Science38, 2003, 4849-4856.

 

64.    Xie J., Alpas A.T. and Northwood, D. O., “The Effect of Erosion on the Electrochemical Properties of AISI 1020 Steel”, Journal of Materials Engineering and Performance, 12(1), 2003, 77-86.

 

65.    Riahi A.R. and Alpas A.T., “Wear Map for Grey Cast Iron”, Wear, 255, 2003, 401-409.

 

66.    Elmadagli M. and Alpas A.T., “Metallographic Analysis of the Deformation Microstructure of Copper Subjected to Orthogonal Cutting”, Materials Science and Engineering A, 355, 2003, 249-259.

 

67.    Riahi A.R., Perry, T. and Alpas A.T., “Scuffing Resistances of Al-Si Alloys: Effects of Etching Condition, Surface Roughness and Particle Morphology”, Materials Science and Engineering A, 343, 2003, 76-81.

 

68.    Edrisy A. and Alpas A.T., “Microstructures and Sliding Wear Resistances of 0.2% Carbon Steel Coatings Deposited by HVOF and PTWA Thermal Spray Processes”, Thin Solid Films, 420-421, 2002, 338-344.

 

69.    Zhang H. and Alpas A.T., “Quantitative Evaluation of Plastic Strain Gradients Generated during Orthogonal Cutting of an Aluminum Alloy”, Materials Science and Engineering A, 332, 2002, 249-254.

 

70.    Xie J., Alpas A.T. and Northwood D.O., “A Mechanism for the Crack Initiation of Corrosion Fatigue of Type 316L Stainless Steel in Hank’s Solution”, Materials Characterization, 48, 2002, 271-277.

 

71.    Riahi A.R. and Alpas A.T., “The Role of Tribo-layers on the Sliding Wear Behavior of Graphitic Aluminum Matrix Composites”, Wear, 251, 2001, 1396-1407.

 

72.    Edrisy A., Perry T., Cheng Y.T. and Alpas A.T., “Wear of Thermal Spray Deposited Low Carbon Steel Coatings on Aluminum Alloys”, Wear, 251, 2001, 1023-1033.

 

73.    Edrisy A., Perry T., Cheng Y.T. and Alpas A.T., “The Effect of Humidity on the Sliding Wear of Plasma Transfer Wire Arc Thermal Sprayed Low Carbon Steel Coatings”, Surface and Coatings Technology, 146-147, 2001, 571-577.

 

74.    Hutchings I.M., Wilson S. and Alpas A.T., “Wear of Aluminum-based Composites”, Comprehensive Composite Materials, 3, 2000, 501-519.

 

75.    Wilson S. and Alpas A.T., “Tribo-layer Formation during Sliding Wear of TiN Coatings”, Wear, 245, 2000, 223-229.

 

76.    Chen H. and Alpas A.T., “Sliding Wear Map for the Magnesium Alloy Mg-9Al-0.9 Zn (AZ91)”, Wear, 246, 2000, 106-116.

 

77.    Alpas A.T. and Inagaki J., “Effect of Microstructure on Fracture Mechanisms in Galvannealed Coatings”, International Journal of Iron and Steel Institute of Japan, 40, 2000, 172-181.

 

78.    Wilson S. and Alpas A.T., “Wear Mechanism Maps for TiN-Coated High Speed Steel”, Surface and Coatings Technology, 120-121, 1999, 519-527.

 

79.   Wilson S. and Alpas A.T., “Thermal Effects on Mild Wear Transitions in Dry Sliding of an Aluminum Alloy”, Wear, 225-229, 1999, 440-449.

 

80.    Xie X., Wu Y., Alpas A.T. and Northwood, D.O., “Fracture Analysis of a Hip Joint Fractured in-Vivo”, Microstructural Science, 26, 1999, 167-170.

 

81.    Wilson S. and Alpas A.T., “TiN Coating Wear Mechanisms in Dry Sliding Contact against High Speed Steel”, Surface and Coatings Technology, 108-109, 1998, 369-376.

 

82.    Northwood D.O. and Alpas A.T., “Mechanical and Tribological Properties of Nanocrystalline and Nanolaminated Surface Coatings”, Nanostructured Materials, 10, 1998, 777-793.

 

83.    Zhang J. and Alpas A.T., “Transition Between Mild and Severe Wear in Aluminium Alloys”, Acta Materialia, 45, 1997, 513-528.

 

84.    Wilson S. and Alpas A.T., “Effect of Temperature and Sliding Velocity on TiN Coating Wear”, Surface and Coatings Technology, 94-95, 1997, 53-59.

 

85.    Wilson S. and Alpas A.T., “Wear Mechanism Maps for Metal Matrix Composites”, Wear, 212, 1997, 41-49.

 

86.    Ding Y., Northwood D.O. and Alpas A.T., “Microstructure and Mechanical Properties of Ni-Al Composite Coatings for Tribological Applications”, Surface Engineering, 13, 1997, 31-36.

 

87.    Farhat Z. N., Ding Y., Alpas A.T. and Northwood D.O., “The Processing and Testing of New and Advanced Materials for Wear Resistant Surface Coatings”, Journal of Materials Processing Technology, 63, 1997, 859-864.

 

88.    Ding Y., Zhang Y., Northwood D.O. and Alpas A.T., “PVD NiAl Intermetallic Coatings: Microstructure and Mechanical Properties”, Surface and Coatings Technology, 94-95, 1997, 483-489.

 

89.    Farhat Z.N., Ding Y., Northwood D.O. and Alpas A.T., “Nanoindentation and Friction Studies on Ti-Based Nanolaminated Films”, Surface and Coatings Technology,89, 1997, 24-30.

 

90.    Ding Y., Northwood D.O. and Alpas A.T., “Fabrication by Magnetron Sputtering of Al-Cu-Fe Quasicrystalline Films for Tribological Applications”, Surface and Coatings Technology, 96, 1997, 140-147.

 

91.    Singh J. and Alpas A.T., “High-temperature Wear and Deformation Processes in Metal Matrix Composites”, Metallurgical and Materials Transactions A, 27, 1996, 3135-3148.

 

92.    Chen H. and Alpas A.T., “Wear of Aluminium Matrix Composites Reinforced with Nickel-Coated Carbon Fibres”, Wear, 192, 1996, 186-198.

 

93.    Wilson S. and Alpas A.T., “Dry Sliding Wear of a PVD TiN Coating against Si₃N₄ at Elevated Temperatures”, Surface and Coatings Technology, 86-87, 1996, 75-81.

 

94.    Farhat Z.N., Ding Y., Northwood D.O. and Alpas A.T., “Effect of Grain Size on Friction and Wear of Nanocrystalline Aluminum”, Materials Science and Engineering A, 206, 1996, 302-313.

 

95.    Wilson S. and Alpas A.T., “Effect of Temperature on the Sliding Wear Performance of Al Alloys and Al Matrix Composites” Wear, 196, 1996, 270-278.

 

96.    Ames W. and Alpas, A.T., “Wear Mechanisms in Hybrid Composites of Graphite-20% SiC in A356 Aluminium Alloy (A1-7% Si-0.3% Mg)”, Metallurgical and Materials Transactions A, 26, 1995, 85-98.

 

97.    Ding Y., Northwood D.O. and Alpas A.T., “The Microstructure and Mechanical Properties of Nanocrystalline Laminated A1/A1₂O₃ Composites Fabricated by Magnetron Sputtering”, Materials Science Forum, 189-190, 1995, 309-314.

 

98.    Singh J. and Alpas A.T., “Elevated Temperature Wear of A16061 and A16061-20% A1₂O₃”, Scripta Metallurgica et Materialia, 32, 1995, 1099-1105.

 

99.    Singh J. and Alpas A.T., “Dry Sliding Wear Mechanisms in a Ti₅₀Ni₄₇Fe₃ Intermetallic Alloy”, Wear, 181-183, 1995, 302-311.

 

100.    Ding Y., Farhat Z., Northwood D.O. and Alpas A.T., “Mechanical Properties and Tribological Behaviour of Nanolayered A1/A1₂O₃ and Ti/TiN Composites”, Surface and Coatings Technology, 68-69, 1994, 459-467.

 

101.    Alpas A.T. and Zhang J., “Effect of Microstructure (Particulate Size and Volume Fraction) and Counterface Material on the Sliding Wear Resistance of Particulate-Reinforced Aluminium Matrix Composites”, Metallurgical Transactions A, 25, 1994, 969-983.

 

102.    Zhang J. and Alpas A.T., “Wear Regimes and Transitions in A1₂O₃ Particulate-Reinforced Aluminium Alloys”, Materials Science and Engineering A, 161, 1993, 273-284.

 

103.    Ding Y., Northwood D.O. and Alpas A.T., “Fabrication of Microlaminated A1/A1₂O₃ Composites by Magnetron Sputtering for Tribological Applications”, Surface and Coatings Technology, 62, 1993, 448-453.

 

104.    Alpas A.T., Hu H. and Zhang J., “Plastic Deformation and Damage Accumulation Below the Worn Surfaces”, Wear, 162-164, 1993, 188-195.

 

105.    Zhang J. and Alpas A.T., “Delamination Wear in Ductile Materials Containing Second Phase Particles”, Materials Science and Engineering A, 160, 1993, 25-35.

 

106.    Alpas A.T. and Zhang J., “Effect of SiC Particulate Reinforcement on the Dry Sliding Wear of Aluminium-Silicon Alloys (A356)”, Wear, 155, 1992, 83-104.

 

107.    Alpas A.T. and Zhang J., “Wear Rate Transitions in Cast Aluminium—Silicon Alloys Reinforced with SiC Particles”, Scripta Metallurgica et Materialia, 26, 1992, 505-509.

 

108.    Alpas A.T. and Embury J.D., “The Role of Subsurface Deformation and Strain Localization on the Sliding Wear Behaviour of Laminated Composites”, Wear, 146, 1991, 285-300.

 

109.    Alpas A.T. and Embury J.D., “Sliding and Abrasive Wear Behaviour of an Aluminium (2014)—SiC Particle Reinforced Composite”, Scripta Metallurgica, 24, 1990, 931-935.

 

110.    Alpas A.T., Embury J.D., Hardwick D.A. and Springer R.W., “The Mechanical Properties of Laminated Microscale Composites of A1/A1₂O₃”, Journal of Materials Science, 25, 1990, 1603-1609.

 

111.    Alpas A.T., Edwards L. and Reid C.N., “The Effect of R-Ratio on Near Threshold Fatigue Crack Growth in a Metallic Glass and a Stainless Steel”, Engineering Fracture Mechanics, 36, 1990, 77-92.

 

112.    Alpas A.T., Edwards L. and Reid C.N., “Fracture and Fatigue Crack Propagation in a Nickel-Base Metallic Glass”, Metallurgical Transactions A, 20, 1989, 1395-1409.

 

113.    Alpas A.T. and Embury J.D., “Flow Localization in Thin Layers of Amorphous Alloys in Laminated Composite Structures”, Scripta Metallurgica, 22, 1988, 265-270.

 

114.    Alpas A.T., Edwards L. and Reid C.N., “Fatigue Crack Propagation in a Ni₇₈Si₁₀B₁₂ Metallic Glass with Amorphous and Partially Crystalline Structures”, Materials Science and Engineering A, 98, 1988, 501-504.

 

115.    Alpas A.T., Edwards L. and Reid C.N., “Shear Crack Propagation in a Nickel Base Metallic Glass”, Acta Metallurgica et Materialia, 35, 1987, 787-796.