Pursue strengths in research and graduate education

Symposium examines studies of sustainability

Nearly 100 local and international scientists, engineers, policy makers, industry leaders, and entrepreneurs gathered June 20 to 22 in the Ed Lumley Centre for Engineering Innovation to discuss recent advances in renewable energy generation, transmission, storage, and consumption.

The Energy and Sustainability 2018 Summit examined studies on climate change, waste and recycling, green buildings, green economy, and social sustainability and featured an electric conversion performance vehicle.

UWindsor students and alumni honoured by engineering community

Several University of Windsor engineering students and alumni were honoured during a local celebration of the engineering profession.

Windsor’s Engineering Month Committee hosts an annual awards luncheon to “bring public awareness to the diversity and importance of the exciting fields of engineering and technology and invite prospective students to consider these professions,” said Tina Hawco, chair of the Engineering Month Committee.

The committee is comprised of engineers and technologists from local municipalities, consulting engineering firms, the University of Windsor, St. Clair College, professional associations and industry.

Priscilla Williams, a PhD candidate in the civil and environmental engineering department, Michael Cappucci, BASc ’11, and Aaron Blata, BASc ’14, were named the Top Three Under 30 during a ceremony April 13, 2018 at the Fogolar Furlan Club for demonstrating higher than average abilities to undertake engineering projects, outstanding work ethic and leadership early in their careers.

Hum generating buzz on the other side of the world

A University of Windsor engineering professor will be featured in a Japanese science show for his investigation into the source of the infamous Windsor Hum.

A camera crew from Japan’s national public broadcaster NHK made a special trip to campus April 16 to interview and film Colin Novak, an associate professor in the mechanical, automotive and materials engineering department.

Production co-ordinator Takayo Nagasawa said the segment will run as part of an episode focused on the sound of the cosmos and people who make data from sound.

“We found out about the Windsor Hum and we couldn’t tell the story without interviewing Dr. Novak,” she said during a break from filming in the university’s Centre for Automotive Research and Education.

Engineering students address climate impacts on water resources

Swollen by rain and melting snow, the Thames River burst its banks in February, inundating southwestern Ontario with its worst floods in 40 years.

The effects of such a catastrophe can be mitigated, says Monika Saha, a master’s candidate in civil engineering, and one of more than 20 students who presented projects in the Centre for Engineering Innovation on Thursday, March 22, in celebration of World Water Day.

Saha is working to create models of the lower Thames River that can predict floods in Chatham-Kent.

“We’ll basically capture the flow. With our hydrologic and hydraulic models getting the input level, it will give you the output to predict which areas will be inundated,” she said. “You will be able to take precautions.”

Blog records student involvement in Indian hydro-engineering project

Dylan Verburg grew up on a farm, and his experience with small construction projects there has proven invaluable in his current challenge — deploying equipment in a drainage pond outside the Indian capital of New Delhi in an attempt to improve water quality.

“Two 50-foot sections of tubing were placed … with the intention of oxidizing the inlet stream before it mixes with the main body of the lake,” the civil engineering student writes in a blog on the Windsor Engineering website. “Six additional lines are placed strategically in the main body of the lake,” located along the Yamuna River in North Delhi.

He will measure the resulting changes, which aim to aerate the water, allowing beneficial bacteria to flourish and naturally restore the ecosystem.

Competition sees students coast to victory while honing design skills

Mechanical engineering students took a break from their books Friday to compete against their peers in a gravity car competition. More than 50 students took part in the friendly competition hosted for the first time by the university’s Master of Engineering Auto Student Advisory Council.

“This competition is an opportunity for students to showcase their design skills and their knowledge of fundamental engineering concepts such as aerodynamics,” said Tracy Beemer, program administrator for the MEng Automotive program.

Combustion research lands Andrzej Sobiesiak international accolade

The head of the UWindsor Department of Mechanical, Automotive and Materials Engineering has been recognized by the Polish Academy of Sciences for his outstanding contributions towards advances in the knowledge of combustion process and technologies.

Andrzej Sobiesiak received the Dionizy Smoleński Medal September 5, during a joint meeting of the Polish Section of the Combustion Institute and XXIII International Symposium on Combustion Processes in Rynia near Warsaw, Poland after delivering a keynote lecture on “Internal Combustion Engines Fuelled with Solutions of Liquid and Gaseous Fuels.”

At the award ceremony, Dr. Sobiesiak was cited for his research on droplets combustion in microgravity, development and work on flameless combustion and ultra-low NOx burner, Homogeneous Charge Compression Ignition (HCCI) engines charged with fuels derived from biomass and unique split-cycle engine fuelled with natural gas.

UWindsor engineering researchers receive nearly $2 million in government funding

Dr. Daniel Green displays a sheet metal specimen in the Mechanical Testing Lab at the Ed Lumley Centre for Engineering Innovation. The specimen was stretch-formed in a formability test.

An injection of nearly $2 million in federal funds will aid University of Windsor researchers like Daniel Green, who is helping automakers incorporate lightweight sheet materials into their vehicles.

The automotive sector is turning to lightweight materials as an alternative to steel to improve fuel efficiency. However, lower-density metals tend to have limited formability, says Dr. Green, an associate professor who specializes in materials engineering.

“Innovative forming processes need to be developed and optimized for the production of automotive parts,” he said. “With high-speed forming, we can get 100 per cent more formability than we can with conventional stamping.”

Green is one of 14 UWindsor engineering professors who was awarded funding through the 2017 Discovery Grants Program — an annual competition run by the Natural Sciences and Engineering Research Council of Canada (NSERC) to advance research in Canadian universities.

Engineering graduate receives Governor General’s Gold Medal

Lakshmi Varaha Iyer, a recipient of the Governor General’s Gold Medal, receives congratulations from UWindsor president Alan Wildeman and chancellor Ed Lumley, Saturday at Convocation.

An engineering graduate was honoured for his outstanding academic achievement this past weekend during the 108th Convocation ceremonies held in the St. Denis Centre.

Lakshmi Varaha Iyer, who received a PhD in Electrical Engineering in 2016, received the Governor General’s Gold Medal from Provost and Vice-President, Academic, Douglas Kneale.

The medals were established in 1873 by Lord Dufferin, Canada’s third Governor General after Confederation, to encourage academic excellence across the nation. Over the years, they have become the most prestigious award that students in Canadian schools can receive, recognizing a student graduating with the highest grade point average among peers.

During his time at UWindsor Dr. Iyer received, among other honours, an NSERC Canada Graduate Doctoral Scholarship; a Tri-Council Recognition Scholarship; and the University of Windsor Graduate Scholarship and Outstanding Graduate Student Award for Excellence in Research, Scholarship and Creative Activity.