UWindsor’s Dr. Rupp Carriveau leads the CLEEN2040 Shift Energy Academy, a three-hour workshop designed for developers, utilities, service providers and researchers.
Nearly 100 local and international scientists, engineers, policy makers, industry leaders, and entrepreneurs gathered June 20 to 22 in the Ed Lumley Centre for Engineering Innovation to discuss recent advances in renewable energy generation, transmission, storage, and consumption.
The Energy and Sustainability 2018 Summit examined studies on climate change, waste and recycling, green buildings, green economy, and social sustainability and featured an electric conversion performance vehicle.
— Published on Jun 28th, 2018
A dedicated engineering career fair provided hundreds of University of Windsor students an opportunity to engage with local employers as they prepare to transition into the workforce.
In collaboration with the Faculty of Engineering, the Department of Co-operative Education and Workplace Partnerships hosted its first career fair for new grads, soon-to-be grads and recent alumni seeking full-time employment in the engineering industry.
More than 430 students equipped with resumés met with 19 employers on June 1 in the Ed Lumley Centre for Engineering Innovation.
“Connecting employers to our career-ready students is very important to us, so we are thrilled with the outcome of our Engineering Career Fair,” says event organizer Sarah Overton, a campus engagement coordinator in the university’s department of Co-operative Education and Workplace Partnerships. “We look forward to building on the success of this event in the future.”
— Published on Jun 5th, 2018
Michael Cappucci, BASc ’11, was one of three alumni named the Top Three Under 30 by Windsor’s Engineering Month Committee during a ceremony April 13, 2018 at the Fogolar Furlan Club.
Several University of Windsor engineering students and alumni were honoured during a local celebration of the engineering profession.
Windsor’s Engineering Month Committee hosts an annual awards luncheon to “bring public awareness to the diversity and importance of the exciting fields of engineering and technology and invite prospective students to consider these professions,” said Tina Hawco, chair of the Engineering Month Committee.
The committee is comprised of engineers and technologists from local municipalities, consulting engineering firms, the University of Windsor, St. Clair College, professional associations and industry.
Priscilla Williams, a PhD candidate in the civil and environmental engineering department, Michael Cappucci, BASc ’11, and Aaron Blata, BASc ’14, were named the Top Three Under 30 during a ceremony April 13, 2018 at the Fogolar Furlan Club for demonstrating higher than average abilities to undertake engineering projects, outstanding work ethic and leadership early in their careers.
— Published on Apr 19th, 2018
Journalist Takayo Nagasawa of Japan’s national public broadcaster NHK interviews engineering professor Colin Novak about the infamous Windsor Hum.
A University of Windsor engineering professor will be featured in a Japanese science show for his investigation into the source of the infamous Windsor Hum.
A camera crew from Japan’s national public broadcaster NHK made a special trip to campus April 16 to interview and film Colin Novak, an associate professor in the mechanical, automotive and materials engineering department.
Production co-ordinator Takayo Nagasawa said the segment will run as part of an episode focused on the sound of the cosmos and people who make data from sound.
“We found out about the Windsor Hum and we couldn’t tell the story without interviewing Dr. Novak,” she said during a break from filming in the university’s Centre for Automotive Research and Education.
— Published on Apr 19th, 2018
Liza-Anastasia DiCecco, mechanical, automotive and materials engineering master's student, presents during the Three Minute Thesis competition at the University of Windsor on March 26.
A UWindsor Engineering graduate student represented the University of Windsor at a provincial Three Minute Thesis competition.
Liza-Anastasia Di-Cecco, a master's student in Materials Engineering, presented her 3D printing research at the Ontario 3MT® competition final on April 19, 2018 at York University.
Di-Cecco had three minutes and a single presentation slide to deliver her presentation titled "Move over plastic, we're 3D printing titanium."
"In my research, I’m studying the material properties of pure titanium made through a specific 3D printing process using plasma fabrication," Di-Cecco said. "I’m concentrating on looking at their strength, hardness, and durability, while also looking at what’s happening at the microscopic level to characterise these parts."
Di-Cecco said 3D printing is expanding our ability to make parts and more complex items such as custom prosthetics and orthotics and lighter and more fuel efficient cars.
"Even advanced rocket fuel nozzles that might someday get us to Mars; The possibilities of this research are endless," she added.
Three UWindsor Engineering graduate students made it to the final six in the University of Windsor's Three Minute Thesis competition where Di-Cecco took home a second-place prize of $500.
— Published on May 8th, 2018
Students from the course-based Master of Mechanical Engineering - Automotive program bring valuable skills with them into the workplace, says Gordon Leslie.
Corporate engineering manager at automotive parts supplier the Narmco Group, he was in attendance Wednesday at the Centre for Engineering Innovation for poster presentations by students on their experiences with co-operative education placements.
The Narmco Group was one of those co-op employers, and Leslie said engineering grads make a good fit for the industry.
“We used to promote toolmakers but we now we’re looking at hiring people with an engineering background,” he said. “Engineering students are learning to tackle problems.”
He was impressed with contributions by Triyambak Tripathy, who completed a co-op work term but has continued in a part-time job with the firm while he completes his degree.
— Published on Mar 23rd, 2018
A project to design and build hydraulic robotic arms powered by syringes taught a class of engineering students about the challenges of the profession.
Teams demonstrated their creations for the third-year course “Manufacturing Process Design,” Thursday in the Centre for Engineering Innovation. Each project had to incorporate several joints and be able to grasp and lift an object, operated by rubber-piston needle syringes.
Designs incorporated wood and metal, dowels and glue, 3D-printed and molded plastics, employing fluids as different as oil and water to operate crab-like claws.
— Published on Dec 8th, 2017
M.Eng student Bhavesh Lakhankiya completed an internship at Diageo Canada Inc. in Amherstburg, Ont..
— Published on Jan 4th, 2018
A volunteer from Scouts Canada helps students Malav Rathod and Amir Sarikhani prepare for the first-ever Gravity Car Race held by the Master of Engineering Auto Student Advisory Council. Scouts Canada provided the racetrack.
Mechanical engineering students took a break from their books Friday to compete against their peers in a gravity car competition. More than 50 students took part in the friendly competition hosted for the first time by the university’s Master of Engineering Auto Student Advisory Council.
“This competition is an opportunity for students to showcase their design skills and their knowledge of fundamental engineering concepts such as aerodynamics,” said Tracy Beemer, program administrator for the MEng Automotive program.
— Published on Jun 8th, 2018
Receiving the Dionizy Smoleński Medal from the Polish Academy of Sciences is a special honour for Windsor engineering professor Andrzej Sobiesiak, who studied with professor Smoleński as an undergraduate in Warsaw.
The head of the UWindsor Department of Mechanical, Automotive and Materials Engineering has been recognized by the Polish Academy of Sciences for his outstanding contributions towards advances in the knowledge of combustion process and technologies.
Andrzej Sobiesiak received the Dionizy Smoleński Medal September 5, during a joint meeting of the Polish Section of the Combustion Institute and XXIII International Symposium on Combustion Processes in Rynia near Warsaw, Poland after delivering a keynote lecture on “Internal Combustion Engines Fuelled with Solutions of Liquid and Gaseous Fuels.”
At the award ceremony, Dr. Sobiesiak was cited for his research on droplets combustion in microgravity, development and work on flameless combustion and ultra-low NOx burner, Homogeneous Charge Compression Ignition (HCCI) engines charged with fuels derived from biomass and unique split-cycle engine fuelled with natural gas.
— Published on Jun 8th, 2018